Sofas and armchairs
Tell us quantity, dimensions and access.
RIFT LAB / WASTE ROUTER
Search the material before it reaches the van. You’ll see what is normally accepted, what must be declared separately and what needs a specialist route.
Tell us quantity, dimensions and access.
Accepted by agreement; identify mattress quantity separately.
Say whether dismantling is required.
Describe contents—do not mix undisclosed hazardous items.
Rolled or loose; give room sizes where possible.
Accepted only when specifically listed and quoted.
WEEE item—identify type and quantity before collection.
Disconnect and drain before collection unless agreed otherwise.
Keep separate from general waste and provide a rough count.
Bagged or loose; disclose soil, turf and tree trunks separately.
Photographs help confirm volume and loading.
Very dense—must be declared and weight-planned before collection.
Dimensions and photographs required; lifting review may be needed.
Remove nails where practical and disclose treated timber.
Weight-led material; quantity must be agreed before loading.
Dense material; photographs and bag/container count required.
Must be kept separate from other waste and quoted specifically.
List ceramics, units, worktops and appliances separately.
Identify glass, frames and approximate dimensions.
Provide quantities, floors and lift/loading-bay information.
Flattened volume and contamination affect the collection plan.
Send an inventory or walkthrough for larger clear-outs.
State quantity, condition and whether they are stacked.
Weight, dimensions and lifting requirements must be checked.
Requires an agreed secure-destruction route; never mix with general clearance waste.
Do not place in the collection. Specialist classification and routing required.
Do not disturb. Requires a licensed specialist and appropriate survey/identification.
Do not load without prior identification and an agreed specialist route.
Not part of a normal clearance. Isolate safely and use a qualified specialist.
Do not mix or move. Identify the container and contents for specialist advice.
Must be declared and quoted as a separate waste stream.
Product, packaging, condition, containment and quantity must be assessed before acceptance.
Exact identification, litres, viscosity, temperature, container condition and destination are required.
Never place an undisclosed hazardous or unknown item in the load. Asbestos, clinical waste, sharps, chemicals, gas cylinders, fuel, oils and unknown liquids are excluded from the standard RIFT service.
Ready to scope it?